PRODUCTS

•• Exhaust extraction equipments

•• Grease equipments

• Pneumatic pumps

• Accessories

• Compressed air

• Kits for greasing

• Wall-fixing kits for greasing

•• Oil equipments

•• Washing equipments

•• Engine crossbars

•• Orientable cradle supports

•• Automatic hose reels

	Search »

CLEARING UP ON THE COMPRESSION RATIO
When talking about the compression of a pneumatic pump (75:1), this means the direct ratio which exists between the pressure of the compressed air introduced, and the pressure leaving the pump.
An example:
Take a pump with a compression ratio of 75:1:
air pressure introduced at 1 bar will output fluid at about 1 x 75 = 75 bars;
air pressure introduced at 6 bar will output fluid at about 6 x 75 = 450 bars.

Pneumatic grease pumps

Pneumatic pumping system for greasing with 50:1 / 75:1 and 100:1 compression ratio.

Safe : made in conformity with the EEC 89/392 directive and subsequent modifications.

Ratio	Grease type	Hose lenght
50 : 1	NLGI00 / NLGI0 / NLGI1 / NLGI2	10 / 15 m
75 : 1	NLGI2 / NLGI3	15 / 20 m
100 : 1	NLGI2 / NLGI3	up to and over 20 m

MATERIALS:

Body : anodized alluminium
Sleeve : anodized alluminium
Pumping : Carbon Steel
Packing : NBR / Polyuretane

Use technical features:

Temp. : +10°C / +40°C
Type of fluid : petrol. grease

Displaying 4 to 6 (of 9 products)

1 2 3 [Next >>]

48 cm

74 cm

95 cm

art. G80/1
(20 kg)

art. G80/2
(60 kg)

art. G80/3
(180 kg)

Pneumatic pumping system for greasing with compression ratio 75 : 1 .

art.		G80/1	G80/2	G80/3
Compression ratio	-	75 : 1	75 : 1	75 : 1
Max grease out pressure	bar	600	600	600
Air pressure max/min	bar	8 - 3	8 - 3	8 - 3
Acoustic power level	dB	93	93	93
Air consuption	L / min	190 - 200	190 - 200	190 - 200
Flow rate *	kg / min	0.65	0.65	0.65
Suction pipe length	m	0.48	0.74	0.95
Suction pipe diameter	mm	30	30	30
Use for drums of	-	12 / 30 kg	50 / 60 kg	180 / 200 kg